Force Fed Engineering Turbo Kits!

(1/4) > >>

ForceFedEngineering:
Force Fed Engineering is proud to announce that we are bringing the same technology that helped us make 676WHP, and run 10.65 @ 137MPH (This was out of fuel injector, and in a 2800+ LBS street car!) to the public!

Tired of seeing all the GT28xx based turbo kits, we decided it was time that the community have the option to compete in the import scene!

All of these kits do require at a minimum, a built bottom end (Stock 19/20mm pistons are acceptable).

Valvetrain, Cams, and large port/ported small port are recommended. Our reputable source, www.qedpower.com will be more than willing to supply you with a comparable head.

Force Fed Engineering Stage 1:
-GT3071R .63 with your choice of compressor housing.
-Force Fed Engineering Stainless Steel Exhaust Manifold, and Downpipe.
-Tial 38mm Wastegate (44mm Upgrade, available with dump tube or re-route)
-Precision 600HP Intercooler (Upgradable to 750 or 825)
-Force Fed Engineering 2.5" 6061 Aluminum Charge Piping, Turbo to Throttle Body.

Force Fed Engineering Stage 2:
-GT3076R-12 .63 with your choice of compressor housing (Upgrade to .82) .
-Force Fed Engineering Stainless Steel Exhaust Manifold, and Downpipe.
-Tial 38mm Wastegate (44mm Upgrade, available with dump tube or re-route)
-Precision 600HP Intercooler (Upgradable to 750 or 825)
-Force Fed Engineering 2.5" 6061 Aluminum Charge Piping, Turbo to Throttle Body (Optional 3" Core to Throttle Body pipe).

Force Fed Engineering Stage 3:
-GT3582R .82 with your choice of compressor housing (Option for .63, for daily driveability).
-Force Fed Engineering Stainless Steel Exhaust Manifold, and Downpipe.
-Tial 44mm Wastegate (available with dump tube or re-route)
-Precision 600HP Intercooler (Upgradable to 750 or 825)
-Force Fed Engineering 2.5" 6061 Aluminum Charge Piping, Turbo to IC, 3" to Throttle Body.

Force Fed Engineering Stage 4:
-GT37R .82 with your choice of compressor housing.
-Force Fed Engineering Stainless Steel Exhaust Manifold, and Downpipe.
-Tial 44mm Wastegate (available with dump tube or re-route)
-Precision 750HP Intercooler (Upgradable to 825)
-Force Fed Engineering 2.5" 6061 Aluminum Charge Piping, Turbo to IC, 3" to Throttle Body.

Force Fed Engineering Stage 5:
-GT4094R .90 T4 with your choice of compressor housing.
-Force Fed Engineering Stainless Steel Exhaust Manifold, and Downpipe.
-Tial 44mm Wastegate (available with dump tube or re-route)
-Precision 750HP Intercooler (Upgradable to 825)
-Force Fed Engineering 3" 6061 Aluminum Charge Piping (Silicone, V-band, or Wiggins).

For more information, and pictures of a completed Stage 4 system, please go to www.ForceFedEngineering.com/stage4.htm





bobqzzi:
Very nice

Don®:
Quote from: bobqzzi on December 10, 2007, 10:51:30 PM

Very nice


Very Nice indeed  :icon_driving:

elitedübs:
HOT! :funky:

Loxias:
Good job!!
Any photos to share ?

Navigation

[0] Message Index

[#] Next page