is this ok temporarily

[fast_hatch]

well, i'm almost done with the BT install. all i have left is to install the injectors and run the inline.... now heres the question.... i just dumped a good amount of money and i have to save up to get the uni file..... soooo can i just run the k04 file i have right now with the 4 bar fpr untill i get the 630 file? i've heard that i have to get rid of the 4 bar for a 3 bar and can i just limp around for a couple weeks until i save enough money to buy the file..? should i just unplug my maf and run it like that for the short time? its going to be tough to not hit boost... would it be possible to just run it off the wastegate for now or just hold out and baby it around it until it gets tuned?? thanks...

[elitedübs]

I would say you can on limited boost. I ran my 28r with APR ko4 s/w on 16psi for a few week until I got my injectors and inline.

[v84lnch]

you'll more than likely be fine with the k04 file, running the maf/fpr/injectors it was written for. idk what your w/g pressure is, but i ran my 50trim on the oem file at 7psi all day long. ran like oem.