EliteDubs.Com
May 23, 2012, 11:59:14 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
   Home   Help Search GoogleTagged Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Stock cis 2.0 16v fuel pump and bt  (Read 1052 times)
Dubmekanik
n00b and a half
**
Offline Offline

Posts: 65


« on: November 11, 2007, 08:14:21 AM »

Does anyone have an idea if it will provide enough fuel for 4-450 hp 630cc 3071 1.8T? It will be going into an MK2. It's a nice setup with a transfer pump in the tank, and a small surge tank below pass. rear seat with the fuel pump mounted inside for those that are not familiar. I will try to get the model/part number Monday if nobody knows for sure. Thanks!
Logged

  Mobile One, Inc VW/AUDI Performance tuning / Unitronic Dealer for Illinois / 847.724.7097
bobqzzi
Dyno Master Flex
Global Moderator
Rookie
****
Offline Offline

Posts: 328


« Reply #1 on: November 12, 2007, 02:51:46 AM »

Crank HP, yes
Logged
Dubmekanik
n00b and a half
**
Offline Offline

Posts: 65


« Reply #2 on: November 12, 2007, 05:41:18 PM »

Hey Bob...Did you guys have this setup on a car, or are you going by posted/published flow rates?
Logged

  Mobile One, Inc VW/AUDI Performance tuning / Unitronic Dealer for Illinois / 847.724.7097
bobqzzi
Dyno Master Flex
Global Moderator
Rookie
****
Offline Offline

Posts: 328


« Reply #3 on: November 12, 2007, 10:05:52 PM »

I used one on the engine dyno.  Worked fine until 450 crank. They aren;t much cheaper than an 044, so I think I'd go that way.
Logged
Dubmekanik
n00b and a half
**
Offline Offline

Posts: 65


« Reply #4 on: November 12, 2007, 10:32:13 PM »

Do you know if the 044 will fit into the stock housing (undercar)?
Logged

  Mobile One, Inc VW/AUDI Performance tuning / Unitronic Dealer for Illinois / 847.724.7097
bobqzzi
Dyno Master Flex
Global Moderator
Rookie
****
Offline Offline

Posts: 328


« Reply #5 on: November 12, 2007, 11:33:36 PM »

You'd have to cut open the pump and then use the slip on screen supplied with the original pump.  Also, i believe the 16V pump came is 2 different diameters.

I do have a customer running his 420whp Mark II GTI using the 16V pump with no problems
Logged
Pages: [1]   Go Up
  Print  
GoogleTagged: 16v 3076r

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!