EliteDubs.Com
May 23, 2012, 11:40:52 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
   Home   Help Search GoogleTagged Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: looks like i will be going big turbo soon.  (Read 2165 times)
fast_hatch
n00b and a half
**
Offline Offline

Posts: 62


« on: September 29, 2007, 08:42:15 PM »

ok, well i have a k04-001 turbo on my car and it seems to be not enough for my liking. well i found this deal on a turbo kit i can't pass up. ok here are the specs...

Innovative Turbo Systems SH50 T3/T4 50 trim
atp t3 mani
580cc injectors
ATP 3 inch billet maf
ATP fuel rail
Walbro inline 255lph
 dump tube
ATP turbo inlet pipe
ATP oil lines
tial 38mm ext gate
ATP 3 inch downpipe 5 bolt discharge flange
3inch GHL exhaust.

 all this is going into my AWD engine code golf. but heres the deal, i don't know which software to go with. cause i don't think uni makes a 580cc sw tune so maybe revo?

i'm aiming for 320-330whp on this setup on stock internals at about 20 psi. you think this goal is achieveable with this turbo?? i will eventually do rods. oh and theres 70k on the motor, i already have a sachs stg2 clutch and an ATP FMIC.
Logged

k04'd 1.8t 4dr golf
Bastard
2.7t Masta
Global Moderator
Padawan
****
Offline Offline

Posts: 550



« Reply #1 on: September 29, 2007, 11:27:27 PM »

or you could spend a whole 200$ and get the 630cc injectors that unitronic makes a tune for.

Revo... dont make me laugh.
Logged
autoxtrem
n00b and a half
**
Offline Offline

Posts: 24


« Reply #2 on: October 06, 2007, 02:02:57 AM »

for sure run 630cc file with either eurodyne.ca or unitronic.will save many problems down the road
Logged
Iceman
Nugget
Global Moderator
Padawan
****
Offline Offline

Posts: 884



« Reply #3 on: October 18, 2007, 02:15:46 PM »

any updates pete?
Logged

The whip

Iceman out!!

-Dave-
fast_hatch
n00b and a half
**
Offline Offline

Posts: 62


« Reply #4 on: October 21, 2007, 05:33:13 PM »

well, i got the turbo ( ITS t3/t4 50 trim .63 ar), at mani, oil feed and return, dump tube, full GHL 3in exhaust, walbro pump and wiring. all i need to get are three things which are 630cc injectors, tial 38mm wastegate, UnItRoNiCs 630cc sw and i'm good to go. everything is out of the car except the stock mani. all the BT parts are sitting in my basement. i will start installing tommorrow and hope to have all the hardware installed this weekend except the injectors, wastegate, and software. i shooting for about 330-340 whp on 93 at about 23 or so psi when i'm done. so keep an eye out dave  Funky
 
Logged

k04'd 1.8t 4dr golf
fast_hatch
n00b and a half
**
Offline Offline

Posts: 62


« Reply #5 on: November 13, 2007, 12:47:48 AM »

injectors come in on wed, walbro all wired up and hooked up... hopefully car will be running by this weekend. then send out the ecu possibly the following weekend? i don't know. i also gotta hook up the full exhaust and call up GHL and have them send me a new rear outlet cuz the one i got is cracked  argh
Logged

k04'd 1.8t 4dr golf
fast_hatch
n00b and a half
**
Offline Offline

Posts: 62


« Reply #6 on: November 13, 2007, 12:50:26 AM »

i can't wait much longer!!!! flash
Logged

k04'd 1.8t 4dr golf
elitedübs
MKV stylez yo
Administrator
Master
*****
Offline Offline

Posts: 1857



« Reply #7 on: November 13, 2007, 04:12:25 PM »

 hyper
Logged

Anthony
2006 BMP GTi unichipped stg2  icon_smokin
2008 CW Rabbit awaiting unichipping
Pages: [1]   Go Up
  Print  

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!