Quaife LSD installation on a Eurospec O2J (PIC INTENSIVE)

[firefly4322]

OK, so basically I figure I know enough enough about the transmission to install this LSD.  That is in addition to all this information that is out there on the internet. 
So far I havent seen anything on the installation on a O2J with a Eurospec Add-On box.  This is where all my troubles have begun.  I know I should have just spent the $$ for Eurospec to install the LSD at the factory but I figured I could do it and learn something from it as well.  Not necessarily that I cant complete the mission.  So what I am going to do is post pics of what I got so far and if anyone has ANY input I would love to hear it. 

This is what I am working with.  Im in the process of moving so its a decent mess on top of what I am doing. 


This is the tranmission before I begun to work on it. 





After I removed the outer box


Inside the outter box


another angle after I removed the box




puling the bearing pack off the input shaft


another angle of previous


Using a gear puller to slide the bearing pack off




Pushing out the pin


Using a small punch to push the pin out.


finally getting these bolts to break free. 


The bolt on the input shaft had 4 washers


Bolt on the opposing shaft had 3 washers
















Modified by Firefly4322 at 9:51 PM 5-20-2007

[Dubmekanik]

updates? Probably not..Pics don't work..I'd like to help ya!