Here are my results from the dyno today:
GT3076r T3/.63 running a Unitronic 630cc ECU
DYNORUN_25 - wastegate only (14.5psi), 92 oct., +1.5* timing in lemmiwinks
DYNORUN_26 - 21-22psi, 92 oct., -3.75* timing in lemmiwinks
DYNORUN_27 - 23-24psi, 92 oct, -3.75* timing in lemmiwinks
(pour in 5 gallons of 100 oct. to mix w/ 1/4 tank of 92 octane)
DYNORUN_28 - 23-24psi, 92/100oct., default timing
DYNORUN_29 - 25-26psi, 92/100oct., default timing
DYNORUN_24 is from my old set of REVO dynos last week. It is compared against my DYNORUN_27 from today. Boost was the same for both dynos, octane was the same for both dynos, and the MAF was plugged in for both dynos. The temperature and weather conditions were very similar as well. Here are the other REVO dynos that did not use the MAF if you want to compare them as well:
http://forums.vwvortex.com/zerothread?id=3098529
