First dyno sheet at low psi

[vdub28t]

This is the only dyno I have for the car and its running at 14psi...still not to bad of numbers and im happy because its running very smooth
and also here is the thread on the vortex that has alot of the answers to the questions you might ask me about the car 

http://forums.vwvortex.com/zerothread?id=2682521

[elitedübs]

when will you have to do internals for more hp?

[vdub28t]

I believe after 20psi I would need to upgrade internals...(which im saving up to do either this winter or the next).

[enginerd]

How big is that turbo? Im surprised you dont make 200 hp till almost 4K rpm.

perhaps your boost control could use some work. What are you using?

[vdub28t]

t3/t4 turbonetics, ive got an avc-r boost controller

[enginerd]

Looks like it spools late. Maybe play with the gains and see if you can get boost earlier.

Also it looks like there is a dip in the lower rpm range.

Is that the intake manifld changeover valve? The fact that it dips there probably means it shoudl changover later in the RPM. Can EIP make it changover later?

[vdub28t]

The changeover is actually disabled, im talking with them on wends because I ran into some issues regarding the EPC light comming on. I was going to talk to them about the boost also.